The structure of a flat roof requires a constant and effective removal of excess rainfall from the whole surface of the roof covering. The efficient removal prevents the collection of an excessive amount of rainfall the weight of which may pose a threat to the safety and stability of the building’s structure.
In our offer you can find the general and emergency drainage systems for flat roofs. We offer universal drains intended for the use with all types of roof coverings.
The material used to make our products is characterised by high durability and exceptional flexibility. Therefore, the floor drains give the guarantee of effective removal of water for many years.
The drainage system with vertical water removal allows to drain the rainfall to an internal sewage system.
The application of appropriate amount of drainage hoppers allows to efficiently drain the whole roof surface and protects the rooms situated under the roof against flooding.
|TOP outlets – for all roof coverings and green roofs
|Sure-fix outlets – for all roof coverings
|Roof outlets for bitumen roofs
|Roof outlets for PVC membranes
|Roof outlets for TPO membranes
|Roof outlets for EPDM membranes
|Roof outlets for liquid and concrete insulations
Drains with horizontal water drainage, also called the drains with side exit, allow to lead the sewage from the central point of the drain towards the sewage pipe.
They are intended to be used, i.e. on roofs, terraces, garages, and in bathrooms. The horizontal drains are characterised by the drop of the downpipe with inclination of about 3%.
|Roof outlets with horizontal water drainage for bitumen roofs
|Roof outlets with horizontal water drainage for liquid and concrete insulations
Our offer is completed by the accessories to the roof drains. A popular method of securing the permeability of the drains is the use of protective guards. They are placed in the opening of the hopper and prevent any contamination, such as leaves or gravel, from entering the sewage pipe.
Therefore, the reliability period of the drains is significantly extended. The efficiency of a drain in winter conditions may be limited by the ice lying in the pipe. In order to increase the efficiency of the hopper, we advise you to use the heating clamps powered with electricity.
|Self-regulating heating clamps
|Outlet guards clamps for roof outles
|Guards for horizontal outlets
|Guards for liquid insulation
|Roof outlet pipe reducer
The through wall parapet roof drains and scuppers are a group of products used for the external draining and are characterised by a system, which removes the water outside the building through the attic walls.
|Scuppers for bitumen roofs
|Scuppers for PVC membranes
|Scuppers for TPO membranes
|Scuppers for liquid and concrete insulations
|Through wall parapet roof drains for bitumen roofs
|Through wall parapet roof drains for bitumen roofs with HDPE pipe
|Through wall parapet roof drains for PVC membranes
|Through wall parapet roof drains for EPDM membranes
|Through wall parapet roof drains for TPO membranes
|Through wall parapet roof drains for liquid and concrete insulations
|Self-regulating heating clamps
|Through-wall outlet guards
|Square downpipe - Straight connection pipe
The proper ventilation can prevent the damaging and premature aging of materials used to build the roof. The cause of the defects may be the moisture during winter or the excessive heat during summer.
The vent pipes and roof dryer vents for flat and inclined roofs offered by us are characterised by an exceptional resistance to the weather conditions. Our products are used in roofs covered with thermoplastic bitumen membrane, PVC foil, and TPO foil.
|Vent pipes for bitumen roofs
|Vent pipes for PVC membranes
|Vent pipes for TPO membranes
|Flat roof vent pipe extensions - double ventilation
|ESTRAER – moisture removal system
|Roof dryer vents
|Vent pipes with adjustable angle
|Roof dryer vents with decorative coating
|Vent pipes with adjustable angle with decorative coating
Vent pipes – Allow the air and water vapour to exit from the structure. They prevent the creation of air bubbles in the roof insulation when the steam pressure is released and are the basic element of the ventilation systems of non-insulated roofs and roofs covered both with the thermoplastic bitumen membrane and TPO or PCV foils.
Roof dryer vents – They are intended for the ventilation of attics of idle spaces and spaces between the roof and insulation layer. They effectively remove the moisture from insulation materials such as styrofoam or wool.
Ridge ventilation – It is a type of ventilation intended for an installation on the top of inclined roofs, which fits any profile of roof covering. The ridge ventilation is used on a large-scale in the residential construction. It is one of the most effective ventilation systems.
Almost every roof contains various systems in its structure. Whether those are ventilation, sanitary, electric, antenna, or any other devices, they always pose a threat of tightness loss to the roof. All those places should be carefully secured. The roof pipe sealings are used for this purpose.
|Roof sleeves on wires and cables for the thermoplastic bitumen membrane
|Roof sleeves on wires and cables for the PVC membranes
|Roof sleeves on wires and cables for the TPO membranes
|Roof sleeves on pipes for the thermoplastic bitumen membrane
|Roof sleeves on pipes for the PVC membranes
|Roof sleeves on pipes for the TPO membranes
|Covers for ventilation pipes
The use of plastic support pads is an alternative solution for placing the terrace surfaces, gangways, floors lifted on concrete, bitumen, or wooden surfaces, and directly on the ground without the necessity of performing an expensive levelling of the surface on which the construction is built. Thanks to the use of the support pads you will gain an aesthetically built surface that is durable and does not interfere with the building’s structure.
The non-adjustable support pads have been designed for flat surfaces, where there are no height differences in the surface level. Thanks to the modular construction, the height of the terrace can be adjusted by placing subsequent support pads on top of each other.
|Modular paving support pads with fixed height - from 10 mm to 30 mm
|Paving support pads with fixed height, rubber, wedge, and with increased base
The adjustable support pads have been designed for the construction of terraces, where the surface on which you place the support pads is irregular or there are drops or cavities in the surface.
|Paving support pads with adjustable height – Micromart – from 15 mm to 35 mm
|Paving support pads with adjustable height – standard – from 35 mm to 380 mm
|Paving support pads with adjustable height – standard Plus – from 22 mm to 550 mm
|Self-levelling paving support pads with adjustable height – from 40 mm to 1000 mm
The accessories usable during the finishing works of terraces. The shims, which will decrease the transmission of vibrations of the terrace, or the support pads that remove the irregularities in slab or deck. Cross spacers, as well as slab lifters, significantly help in placing the concrete/ceramic slabs on out support pads.
|Levelling and sound-absorbing support pads
|Slope regulators for the Standard, Minimart, and Megamart support pads
|Slab lifters for slab placement
The accessories used for the finishing works of wooden terraces. Thanks to the use of the concealed deck fittings you will get an even more aesthetic surface.
|Mini timber decking rubber support pad
Almost any element projecting beyond the outline of the building, especially a metal element, may attract an electric discharge. The purpose of the lighting protection systems is to take over the lighting strike and safely move its power to the ground.
The handles and lighting system supports are used to mount the conductor wire or tape in the planned place and in a safe distance from the secured elements. The variation of products and the scope of handled roof coverings allows to secure every roof.
|Lightning conductor holder – Polprofili
|Lightning conductor holders
|Lightning conductor roof clamps
The connectors are used to connect all elements into a single whole and appropriately label them.
The conductor wires and tapes are used to safely move the electric discharge towards the ground.
|Lightning conductor wires, tapes, and ropes
The masts and lighting protection rods are situated in the highest place in terms of the whole system and receive a lighting strike directly.
|Masts and rods
The purpose of the grounding is to lead out the electric charge and neutralise it in the ground.
In the “Accessories” category are located elements, which facilitate the construction and securing of the whole system.
The corners allow to perform easy and aesthetic finishing works of the roof corners. The broad selection of corners allows to properly choose them to the type of used roof coverings. The installation consists of sealing the corner with the waterproofing and provides a complete tightness of the roof surface and high aesthetics of the finishing.
The material used to make corners has been enriched with layers securing against the harmful effect of the UV rays. The high quality materials guarantee the preservation of properties for many years.
|Internal roof corners – for bitumen membrane, PVC, TPO, ECB
|External roof corners – for bitumen membrane, PVC, TPO, ECB