mobile-menu




Self-regulating heating clamp, diameter: 50 - 150 mm

Article: Length: Heating clamp: Price:
im119 780 [mm] 230 [mm] 29,95 EUR

Cena za 1 sztukę



29,95 EUR


The heating clamp is a simple and effective way of preventing the roof drains, through wall parapet roof drains, and downpipes of all types from freezing. It can be used in both newly constructed and already existing draining elements with diameter between 50 and 150 mm.

The basic element of the heating clamp is the 33 W/mb self-regulating heating circuit.

The clamp can be used in newly constructed and already existing elements draining water.

The clamp is powered with a 230V alternating current and does not require the use of a transformer. The clamp possesses a self-regulating temperature system.

The used heating circuit is connected with the powering cable with length of 500 mm. The whole is tightly attached to the mounting tape with the use of a flexible heat-shrink tubing. This protects the heating circuit against damage and moisture, as well as against an electric shock.

Power supply: Alternating current 220-230 V 50 Hz (does not require a transformer)

Power: 7.59 W

Connection: the heating clamp is equipped with a 3 x 0.75 powering cable (wire green-yellow-earthing)

The clamp is made from a material resistant to frost, acid, and water.

Tested acc. to EN 60335-1 (with the exception of paragraph 30).

Dimensions: the length of the heating element - 230 mm, width - 14 mm.

TECHNICAL DATA:

Output: 33 W/mb

Voltage: 230 V ~ 50/60 Hz

Wire diameter: ~ 6 x 13 mm (33 W/mb)

Min. mounting temperature: -25 ºC

Max. working temperature: +65 ºC

Max. exposition temperature: +85 ºC (active, 1000 hours cumulatively)

Type of heating wire: self-regulating, monitored, and unilaterally powered

Vein: 2x 1.25 mm2 (33 W/mb) galvanised copper

Insulation: modified polyolefin

External cover: halogen-free polyolefin, resistant to UV

Min. wire bend radius: 3.5 D

Protection degree: IPX7

Max. protection: 30 A (33 W/mb)

Product Certificates: B

Certification acc. to ISO 9001: IQNET, PCBC

The product is labelled: CE

Article: A B C D
im119 14 780 230 9

* Values in mm



INSTALLATION INSTRUCTIONS
The installation must be carried out by a person with electrical qualifications.

It is recommended to disconnect the power supply during periods of positive temperatures. It is recommended to use a sensor.


1.
A) Placing a heating clamp directly under the groove of the groove.

B) Adjusting the diameter of the band to the outlet pipe circuit.

C) Clamping the band. The serrated belt surface prevents undesired movements of the heating element.

D) Starting the installation by a person with current electrical qualifications.



2.
A) Placing the heating band below the ceiling.

B) Adjusting the diameter of the band to the outlet pipe circuit.

C) Clamping the band. The serrated belt surface prevents undesired movements of the heating element.

D) Starting the installation by a person with current electrical qualifications.


Related products