Intended for two-component concrete insulation and all types of cold-applied liquid insulation.
The whole surface of the sealing flange is perforated, providing a tight roof drainage system when joined with downpipes.
Made of special material characterised by high resistance to UV radiation, ozone, and other atmospheric and chemical agents, adapted to liquid insulation and concretes.
Due to refining additives, the roof drains maintain their flexibility and dimensional stability in a wide temperature range.
Intended for draining roofs and terraces.
When installed horizontally, make sure the drain is pitched at a 3 - 5 degree angle.
|i305.3 - black||88||270||80||75||300|
|i305.4 - black||88||270||80||75||200|
|i305.6 - grey||88||270||80||75||300|
|i305.7 - grey||88||270||80||75||200|
|i305.9 - ivory||88||270||80||75||300|
|i305.10 - ivory||88||270||80||75||200|
A) Position the drain correctly (if necessary, connect with a downpipe or a conical rainhead)
B) Adjust angles appropriately.
C) Distribute the first layer or hydro-insulation, also under the flange. Install the fibreglass reinforcement mesh (5 mm x 5 mm mesh) right up to the edge of the flange.
D) Distribute successive layers of hydro-insulation.