mobile-menu




TOP insulated and heated roof drain

Article: Diameter: Price:
i200.2 75 [mm] 92,90 EUR
i202.2 110 [mm] 103,43 EUR
i204.2 125 [mm] 107,41 EUR
i206.2 160 [mm] 111,27 EUR

Length: 250 [mm]

The set includes a guard with mounting system.

Price for 1 pcs

Pieces in a box: 6 pcs.

Flow capacity l/s

Diameter: H* 1cm: H* 10cm:
75 [mm] 1,6 l/s 4,8 l/s
110 [mm] 3,5 l/s 11,5 l/s
125 [mm] 4,6 l/s 15,0 l/s
160 [mm] 7,5 l/s 19,8 l/s

* H – Height of water column



92,90 EUR

114,26 EUR


TOP with thermal insulation and a heating system (items: i200.2, i202.2, i204.2, i206.2) is one of the best ways to connect the roofing to a downpipe.

Equipped with thermal insulation and embedded, hermetically sealed heating system based on a self-regulating heating wire (14W).

Power supply: 220-230VAC 50Hz (does not require a transformer).

In order to increase its effectiveness, the heating wire has been placed in thermal insulation material.

The heating wire is connected with a power cord (length: 0.5 m).

The whole element is hermetically attached to the drain in order to protect the heating wire against damage and moisture. It does not require grounding and provides protection against electric shock.

Application:

  • Intended for installation on flat roofs, inverted flat roofs, and green roofs.
  • Attached to the roofing using a threaded ring that enables application on various types of roofing (thermoplastic bitumen membrane, PVC, EPDM, TPO, and more).
  • Top roof drain requires mechanical installation and is not intended for welding.
  • An additional layer of insulation reduces the probability of ice obstructing the drain.
  • For more information on the installation process see the Installation Manual.

Manufactured with Moplen EP300K (Polypropylene,Impact Copolymer)

DIMENSIONS AND CAPACITY

  • dia. 75 mm – 300 l/min.
  • dia. 110mm – 492 l/min.
  • dia. 125mm – 690 l/min.
  • dia. 160mm – 786 l/min.

List of TOP system components

1. Grate protecting against contamination and plugging.

2. Caulking ring for waterproofing.

3. Protection cover for drainage during assembly.

4. Seal.

5. TOP roof outlet.

6. Heating band.

7. Insulation.

Installing a guard (i24) reduces the capacity by approx. 20%.

* Values in mm.


TOP roof drains installation manual

General installation

 

1. Mark and prepare a hole in which the roof drain is to be installed. The hole must go through all layers of the roof.

2. Insert the roof drain with a hole template into the downpipe socket in a correct position (check the position of the gasket). Fasten the roof drain to the substrate.

3. If there are multiple layers of hydro-insulation, the roof drain should be installed on the first layer. While heating the area around the flange, avoid direct contact of the flame with the roof drain.

4. Install a waterproof membrane (the bitumen membrane should be applied to a template and heated with extreme caution). Avoid forming joints close to the drain. When installed, press the central pin of the template so that it extends over the membrane. Use a guide and a knife to cut out a round drainage hole.

5. Remove the cover and turn the clamping ring tightly until required tightness is achieved. Attach a leaf and gravel guard.

1. INDUSTRIAL ROOF WITH A DOUBLE ROOF DRAIN

 

1. TOP roof drain Ø 75-110-125-160 mm.

2. TOP roof drain Ø 160 mm.

3. Leaf and gravel guard

4. Heater, 14 W 220 V

5. Downpipe or downpipe socket

6. Ceiling

7. Water vapour barrier

8. Thermal insulation

9. First layer of membrane

10. Second layer of membrane

11. Non-woven fabric

12. Washed gravel 5-30 mm.

2. ROOF ADAPTED TO PEDESTRIAN TRAFFIC

 

1. TOP roof drain Ø 75-110-125-160 mm.

2. Guard connector

3. Perforated guard intended for pedestrian traffic

4. Downpipe socket

5. Ceiling

6. Water vapour barrier

7. Thermal insulation

8. First layer of membrane

9. Second layer of membrane

10. Non-woven fabric

11. Concrete substrate

12. Anti-slip tiles

3. ROOF ADAPTED TO PEDESTRIAN TRAFFIC

 

1. TOP roof drain Ø 75-110-125-160 mm.

2. Guard connector

3. Guard intended for pedestrian traffic

4. Drain thermal insulation – foamed polystyrene, heater (14W 220V)

5. Downpipe socket

6. Ceiling

7. Water vapour barrier

8. Thermal insulation

9. First layer of membrane

10. Second layer of membrane

11. Non-woven fabric

12. Concrete substrate

13. Anti-slip tiles

4. INDUSTRIAL BALLASTED ROOF

 

1. TOP roof drain Ø 75-110-125-160 mm.

2. Leaf and gravel guard

3. Drain thermal insulation – polystyrene foam

4. Heater, 14 W 220 V

5. Downpipe socket

6. Ceiling

7. Water vapour barrier

8. Thermal insulation

9. First layer of membrane

10. Second layer of membrane

11. Non-woven fabric

12. Washed gravel 5-30 mm.

5. GREEN ROOF

 

1. TOP roof drain Ø 75-110-125-160 mm.

2. Downpipe socket Ø 160

3. Perforated guard connector

4. Heater, 14 W 220 V

5. Downpipe socket

6. Ceiling

7. Water vapour barrier

8. Thermal insulation

9. First layer of membrane

10. Second layer of membrane

11. Non-woven fabric

12. Drainage and storage panel (Bauder DSE 20)

13. Non-woven fabric

14. Earth on a green roof

6. GREEN ROOF

 

1. TOP roof drain Ø 75-110-125-160 mm.

2. Perforated guard connector

3. Guard intended for pedestrian traffic

4. Heater, 14 W 220 V

5. Downpipe socket

6. Ceiling

7. Water vapour barrier

8. Thermal insulation

9. First layer preventing from root penetration

10. Second layer of membrane

11. Non-woven fabric

12. Drainage and storage panel (Bauder DSE 20)

13. Non-woven fabric

14. Earth on a green roof

7. GREEN ROOF

 

1. TOP roof drain Ø 75-110-125-160 mm.

2. Perforated guard connector

3. Guard intended for pedestrian traffic

4. Heater, 14 W 220 V

5. Downpipe socket

6. Ceiling

7. Water vapour barrier

8. Thermal insulation

9. First layer of membrane

10. Second layer of membrane

11. Filtering and separating layer

12. Gravel (60-70 mm).

13. Earth

8. INVERTED ROOF

 

1. TOP roof drain Ø 75-110-125-160 mm.

2. Perforated connector

3. Supports

4. Guard

5. Downpipe socket

6. Ceiling

7. First layer of membrane

8. Second layer of membrane

9. Non-woven fabric

10. Thermal insulation

11. Non-woven fabric

12. Terrace slabs

9. INVERTED ROOF ADAPTED TO PEDESTRIAN TRAFFIC

 

1. TOP roof drain Ø 75-110-125-160 mm.

2. Guard

3. Supports

4. Drain thermal insulation

5. Downpipe socket

6. Ceiling

7. First layer of membrane

8. Second layer of membrane

9. Non-woven fabric

10. Thermal insulation

11. Filtering layer

12. Terrace slabs

Related products