mobile-menu




Standard 240 roof drain for TPO membrane

Article: Diameter: Price:
150-040-240-040 30 [mm] 8,89 EUR
150-040-240-060 50 [mm] 9,83 EUR
150-040-240-075 67 [mm] 10,06 EUR
150-040-240-080 71 [mm] 10,30 EUR
150-040-240-090 78 [mm] 10,53 EUR
150-040-240-100 92 [mm] 11,00 EUR
150-040-240-110 94 [mm] 12,17 EUR
150-041-240-125 113 [mm] 12,40 EUR
150-040-240-125 116 [mm] 12,40 EUR
150-040-240-140 128 [mm] 15,44 EUR
150-040-240-150 134 [mm] 16,61 EUR
150-040-240-160 146 [mm] 18,02 EUR
150-040-240-200 184 [mm] 20,12 EUR

Length: 240 [mm]

Cena za 1 sztukę

Pieces in a box

Article Pieces in a box
150-040-240-040 25
150-040-240-060 25
150-040-240-075 25
150-040-240-080 25
150-040-240-090 25
150-040-240-100 25
150-040-240-110 25
150-041-240-125 18
150-040-240-125 12
150-040-240-140 10
150-040-240-150 10
150-040-240-160 10
150-040-240-200 8

Flow capacity l/s

Diameter: H* 1cm: H* 10cm:
31 [mm] 0,2 l/s 0,6 l/s
53 [mm] 0,6 l/s 2,0 l/s
70 [mm] 1,2 l/s 3,7 l/s
74 [mm] 1,3 l/s 4,2 l/s
82 [mm] 1,7 l/s 5,2 l/s
94 [mm] 2,0 l/s 6,4 l/s
96 [mm] 2,5 l/s 7,9 l/s
116 [mm] 3,4 l/s 10,8 l/s
119 [mm] 3,4 l/s 10,0 l/s
132 [mm] 4,5 l/s 14,2 l/s
141 [mm] 5,1 l/s 16,3 l/s
151 [mm] 5,4 l/s 18,7 l/s
190 [mm] 9,5 l/s 30,1 l/s

* H – Height of water column



8,89 EUR

10,94 EUR


"Standard 240" roof drains are intended for drainage of flat roofs covered with TPO hydro-insulating membrane. Using a sealing flange combined with a downpipe provides a tight roof drainage system.

Made of special material characterised by high resistance to UV radiation, ozone, and other atmospheric and chemical agents, adapted to TPO membranes. Due to refining additives, the roof drains maintain their flexibility and dimensional stability in a wide temperature range.


Articles: A D D1 D2 h
150-040-240-040 235 26 24 30 240
150-040-240-060 235 48 44 50 240
150-040-240-075 320 65 61 67 240
150-040-240-080 280 69 65 71 240
150-040-240-090 320 77 72 78 240
150-040-240-100 300 85 86 92 240
150-040-240-110 320 91 88 94 240
150-051-240-125 320 111 107 113 240
150-040-240-125 320 114 110 116 240
150-050-240-140 380 127 122 128 240
150-050-240-150 380 136 128 134 240
150-050-240-160 38- 146 140 146 240
150-050-240-200 440 185 178 184 240
* Values in mm.




1) Two layers of waterproofing - TPO membrane
2) Roof drain
3) Downpipe
4) Thermal insulation layer
5) Ceiling


1. Mark the drain seating area.

2. Cut out a hole through all layers of the flat roof.

3. Attach the drain to the downpipe.

4. Weld the flange with the membrane and join both layers tightly.

 

A) STANDARD roof drain

B) TPO membrane

C) Thermal insulation

D) Water vapour barrier

E) Ceiling

Related products