mobile-menu




Extra-long 600 roof drain for bitumen membrane

Article: Diameter: Price:
030-160-600-080 72 [mm] 28,08 EUR
030-160-600-090 81 [mm] 29,25 EUR
030-160-600-100 92 [mm] 28,55 EUR
030-160-600-110 100 [mm] 29,72 EUR
030-160-600-125 114 [mm] 33,23 EUR
030-160-600-140 132 [mm] 37,67 EUR
030-160-600-150 142 [mm] 39,78 EUR
030-160-600-160 145 [mm] 41,42 EUR
030-160-600-200 185 [mm] 49,37 EUR

Length: 600 [mm]

Cena za 1 sztukę

Pieces in a box

Article Pieces in a box
030-160-600-080 20
030-160-600-090 20
030-160-600-100 20
030-160-600-110 20
030-160-600-125 18
030-160-600-140 15
030-160-600-150 12
030-160-600-160 12
030-160-600-200 8

Flow capacity l/s

Diameter: H* 1cm: H* 10cm:
072 [mm] 1,3 l/s 4,2 l/s
081 [mm] 1,7 l/s 5.2 l/s
092 [mm] 2,0 l/s 6,4 l/s
100 [mm] 2,5 l/s 7,9 l/s
114 [mm] 3,4 l/s 10,8 l/s
132 [mm] 4,5 l/s 14,2 l/s
142 [mm] 5,1 l/s 16,3 l/s
145 [mm] 5,4 l/s 18,7 l/s
185 [mm] 9,5 l/s 30,1 l/s

* H – Height of water column



28,08 EUR

34,54 EUR


"Extra-long 600" roof drains are intended for drainage of flat roofs covered with thermoplastic bitumen hydro-insulating membrane. Made of special material that binds well with bitumen membranes, they are characterised by high resistance to UV radiation, ozone, and other atmospheric and chemical agents.

Due to refining additives, the roof drains maintain their flexibility and dimensional stability in a wide temperature range and provide short-time resistance to welding, enabling you to weld them directly to bitumen membrane. The sealing flange combined with a downpipe provides a tight roof drainage system. A long outlet pipe enables installation in thick ceilings.


Articles: A D D1 D2 h
030-160-600-080 370 65 63 72 600
030-160-600-090 370 74 72 81 600
030-160-600-100 370 85 83 92 600
030-160-600-110 390 93 91 100 600
030-160-600-125 390 107 105 114 600
030-160-600-140 420 125 123 132 600
030-160-600-150 420 135 133 142 600
030-160-600-160 420 138 136 145 600
030-160-600-200 460 178 176 185 600
* Values in mm.


1. Mark the roof drain seating area on the bitumen base or old roofing.

2. Heat the flange seating area with a burner until bitumen liquidates.

3. Set the drain flange in the roofing.

4. Apply and weld the top layer of bitumen membrane.

 

1. "Extra-long" roof drain

2. Downpipe

3. Top and base layer of thermoplastic bitumen membrane

4. Thermal insulation

5. Ceiling

6. Suspended ceiling

 

A) "Extra-long" roof drain

B) Top layer of bitumen membrane

C) Bitumen base

D) Thermal insulation

E) Ceiling

Related products